รีวิวเรือ | เรือขุดไฟฟ้าแบบสั่งทำพิเศษสำหรับบริษัทเหมืองแร่โพแทสในแคนาดา

เรือขุดไฟฟ้าลำใหม่ของ PADCOM
PADCOM's new electric dredger - Ellicott Dredge Enterprises

เรือขุดแบบมีคนควบคุมนี้ถูกสร้างขึ้นเพื่อตัดผลึกโพแทสในอุณหภูมิที่ต่ำถึง -45°C โดยเข้ามาแทนที่ปั๊มที่ติดตั้งบนเรือบรรทุกในเหมืองโพแทสแห่งเดียวของแมนิโทบา และยังสามารถบรรทุกบนรถบรรทุกคันเดียวได้

US-based Ellicott Dredge Enterprises (EDE) delivered and commissioned a custom electric dredger for Canada’s Potash and Agri Development Corporation of Manitoba (PADCOM) in March 2026.

The manned dredger removes crystallised potash from the HDPE-lined settling lagoon at PADCOM’s solution mine at Harrowby, approximately 16 kilometres (9.9 miles) west of Russell, Manitoba. It pumps the material 427 metres (1,400 feet) to the mine’s processing plant against 6.7 metres (22 feet) of static head.

The mine uses polythermic selective solution mining. Brine injected underground dissolves the potash and leaves the salt in place, and the well returns a solution saturated with potash.

PADCOM President Daymon Guillas told ข่าว CBC in May that the brine is heated to 40°C and the recovered solution is cooled in outdoor ponds to crystallise the potash. This method replaced a mechanical cooling process that had not produced enough potash for profitability.

Outfitted for more efficient material extraction

เรือขุดไฟฟ้าลำใหม่ของ PADCOM
PADCOM's new electric dredger - Ellicott Dredge Enterprises

The dredger was intended to, “increase production over the previous method of using a pump hanging from a barge,” EDE told เบิร์ด มาริไทม์. “The system is designed to work down to the bottom of the lagoon, with a liner protection system added to preserve HDPE liner integrity.”

EDE’s engineering team developed the dredger jointly with PADCOM to deliver the potash flow and slurry density required by the processing plant. The builder said a standard system would not have been compatible with the application.

EDE said the dredger was, “designed to cut potash, with increased horsepower and cutter torque.”

The cutterhead uses high-torque motors and staggered heavy-duty carbide steel teeth. These will grind the deposits into the larger crystals required by the plant rather than pulverising them into powder. Dual hydraulic cylinders raise and lower the heavy duty ladder and push the cutter into the crystallised material.

หัวตัด
Cutterhead - Ellicott Dredge Enterprises

The cutterhead is fitted with liner protection wheels and a removable cage. The cage is used in softer areas and removed when the potash becomes harder. On each dredger from this series, the protection wheels press the liner down as the dredger advances, which helps prevent it from being drawn into the slurry pump.

The dredger traverses the lagoon on a four-point cable drive system with shore anchors and an onboard traversing winch. EDE said the winch provides the, “necessary line pull of the dredger across the lagoon while cutting stiff material.”

Systems permitting full range of operation by a single crewmember

The operator works from a climate-controlled cabin with a human-machine interface touchscreen for dredging set points and monitoring. EDE said the programmable logic controller (PLC) runs a proprietary program.

EDE’s automation software moves the dredger to the end of each cut, returns it to the starting point, and then waits for the operator’s next command.

PADCOM also selected a Solids Sense slurry density control system, which uses a density meter to monitor the percentage of solids in the slurry and adjusts travel speed automatically. This gives the downstream plant a more consistent product.

EDE said the dredger was designed to operate in extreme cold. The PLC and electrical equipment are housed in a NEMA 4X stainless steel enclosure with its own climate control, allowing year-round operation in temperatures as low as -45°C. The electrical system was designed and certified to Canadian Standards Association requirements.

Maintaining a design that could be moved on one truck was the biggest challenge of the project, according to EDE. Detachable port and starboard gangways allow the dredger to keep that capability.

Ryan Horton, Vice President of auger dredges at EDE, said the model selected by PADCOM “is just one of dozens of recent custom dredge systems we have produced for our global customers.”

เรือขุดไฟฟ้าลำใหม่ของ PADCOM
PADCOM's new electric dredger - Ellicott Dredge Enterprises
Custom Potash Dredger
ข้อมูลจำเพาะ
ประเภทเรือ: Stationary dredger
Owner: Potash and Agri Development Corporation of Manitoba, Canada
ผู้ออกแบบ: Ellicott Dredge Enterprises, USA
ผู้สร้าง: Ellicott Dredge Enterprises, USA
Other electronics: Ellicott Dredge Enterprises Solids Sense slurry density control system; Ellicott Dredge Enterprises Auto Sense automatic cut traversal and return
Dredging equipment: Cutterhead; cutting and pumping system
Other equipment installed: Gangways
พื้นที่ปฏิบัติการ: Harrowby, Canada

ต้องการข้อมูลเพิ่มเติมเกี่ยวกับเรื่องนี้ หรือต้องการพูดคุยกับตัวแทนของ Mud Cat เกี่ยวกับโครงการขุดลอกของคุณหรือไม่?

กระทู้ที่เกี่ยวข้อง

อ่างน้ำเกลือโพแทสที่บุด้วย HDPE ของ PADCOM ในรัฐแมนิโทบา ประเทศแคนาดา

บริษัท Ellicott Dredge Enterprises ส่งมอบและติดตั้งระบบขุดลอกแร่โพแทสไฟฟ้า Mud Cat® 30EC แบบสั่งทำพิเศษสำหรับ PADCOM

เครื่องแยกแร่โพแทสเซียมด้วยไฟฟ้าแบบสั่งทำพิเศษ รุ่น Mud Cat 30E ได้รับการพัฒนาโดยทีมวิศวกรรมของ EDE ร่วมกับลูกค้า เพื่อให้ได้อัตราการไหลและความหนาแน่นของโพแทสเซียมตามที่ต้องการ

เครื่องขุดลอกไฟฟ้าควบคุมระยะไกล Mud Cat MC 40E

เรือขุดลอกไฟฟ้า Mud Cat MC 40E เริ่มใช้งานในสาธารณรัฐประชาธิปไตยคองโก

เมื่อสัปดาห์ที่แล้ว ร็อบ คารูเฟล ช่างเทคนิคภาคสนามอาวุโส ได้ทำการทดสอบใช้งานเครื่องขุดลอกไฟฟ้าควบคุมระยะไกลรุ่น Mud Cat MC 40E ของบริษัท Ellicott Dredge Enterprises LLC ที่เหมืองแห่งหนึ่งในสาธารณรัฐประชาธิปไตยคองโก (DRC)

กรรมาธิการเพรสตัน เดเวอร์ส ดูแลการควบคุมเรือขุดลอกลำใหม่

'การฟื้นฟูเศรษฐกิจ': ท่าเรือชินุกจัดหาอุปกรณ์ขุดลอกเป็นของตนเอง

การจัดหาเรือขุดลอกลำใหม่ถือเป็น “สิ่งสำคัญ” ในการบำรุงรักษาท่าเรือและฟื้นฟูพื้นที่ที่ได้รับผลกระทบจนใช้งานไม่ได้เนื่องจากตะกอนทับถม

โลโก้บริษัท Ellicott Dredge Enterprises

กุมภาพันธ์ 22-25, 2026

Salt Lake City, ยูทาห์

พบกับเราได้ที่บูธหมายเลข 2937

โลโก้บริษัท Ellicott Dredge Enterprises

มีนาคม 3-7, 2026

ลาสเวกัส, เนวาดา

ใช้รหัส: ELL5455C

ติดตามเราได้ที่
บูธ C22319 (ห้องโถงกลาง)