Máy nạo vét điện Mud Cat MC 40E được đưa vào vận hành tại Cộng hòa Dân chủ Congo.

Tuần trước, kỹ thuật viên dịch vụ hiện trường cấp cao, Rob Carufel, đã đưa vào vận hành một máy nạo vét điện điều khiển từ xa Mud Cat MC 40E của công ty Ellicott Dredge Enterprises LLC tại một mỏ ở Cộng hòa Dân chủ Congo (DRC).

Máy nạo vét điện điều khiển từ xa Mud Cat MC 40E
photo courtesy of Ellicott Dredge

The dredge will remove copper tailings from a lined tailings dam to maintain critical storage capacity.

The MC 40E dredges parallel cuts and can dredge to the bottom of the dam without damaging the liner due to its standard liner protection wheels unlike hanging pump dredges which can damage liners and contaminate the local ground water.

Michael Young, Technical Sales Manager, visited the job site in DRC with Tri-Pump personnel to assess the project requirements and determined the Mud Cat 40E to be the most appropriate dredging system solution.

The MC 40E uses a durable hand-held remote control that allows the operator to safely control the dredge from up to 305m (1,000 ft.) away line-of-sight.

Also, the Mud Cat’s standard Auto Sense™ partial automation technology allows the operator to set the cut and then walk away if necessary, and the dredge will make an entire pass from one side of the pond to the other and then automatically back up when it hits the yellow target stop and travel back to the target stop at the starting point and wait for the next command.

Như được thấy trên Dredgingtoday.com.

Bạn muốn biết thêm thông tin về câu chuyện này hoặc muốn nói chuyện với đại diện của Mud Cat về dự án nạo vét của mình?

bài viết liên quan

logo của công ty nạo vét Ellicott

Tháng Hai 22-25, 2026

Salt Lake City, Utah

Hãy đến gặp chúng tôi tại gian hàng số 2937.

logo của công ty nạo vét Ellicott

Tháng 3 3-7, 2026

Las Vegas, Nevada

Mã sử ​​dụng: ELL5455C