Mud Cat E series dredges

泥猫® E-Series - Electric Powered Dredges

If you find yourself answering YES to these questions, then the Mud Cat® E-Series is the right dredge for your operation. Do you want a dredge that…

MC 40E MC 40E Deep Digging MC 50E MC 100E
Length (O.A.): 24 ft. - 3 in. (7.4 m) 42 ft. - 11 in. (13.08m) 28 ft. - 2 in. (8.6m) 33 ft. - 10.5 in. (10.3m)
Width (O.A.): 8 ft. - 4 in. (2.5m) 8 ft. - 6 in. (2.59m) 8 ft. - 3 in. (2.52m) 8 ft. - 5.5 in. (2.57m)
Height (O.A.): 6 ft. - 10 in. (2.1m) 7 ft. 6 in. (2.3m) 7 ft. 6 in. (2.3m) 7 ft. - 9 in. (2.36m)
重量: 5,800 lbs. (2,630 kg) dry 15,500 lbs. (7,030 kg) dry 7,200 lbs. (3,300 kg) dry 9,000 lbs. (4,082 kg) dry
选秀: 16英寸(0.4m) 20英寸(0.5m) 16英寸(0.4m) 18英寸(0.4m)
最大疏浚深度: 14 英尺(4.3 米) 30 英尺(9.1 米) 17 英尺(5.2 米) 20 英尺(6.0 米)
陆路运输: 单车运输 单车运输 单车运输 单车运输
远洋运输: 41 ft. Ocean Container 平架 40 ft. Ocean Container 平架
船体结构: Two 28 in. diameter x 20 ft. (0.7m diameter x 6.1m) 10 gauge (3.4mm) steel (round hull) Two 28 in. x 34 in. x 36 ft. (0.71m x 0.86m x 6.09m) 10 gauge (3.4mm) steel (square hull) Two 28 in. diameter x 24 ft. (0.7m diameter x 7.4m) 10 gauge (3.4mm) steel (round hull) Two 30 in. diameter x 26 ft. (0.8m diameter x 7.9m) 10 gauge (3.4mm) steel (round hull)
316 Stainless Steel hydraulic dredge ladder lines
316 stainless hydraulic fittings and hardware 可选 可选 可选 可选
316 Stainless Steel hull, ladder, and gantries 可选 可选 可选 可选
Submersible Slurry Pump 40 HP(30 kW) 40 HP(30 kW) 50 HP(37 kW) 100 HP(76 kW)
Standard Pump Material: Hi-chrome 450 Brinell volute and impeller Hi-chrome 450 Brinell volute and impeller Hi-chrome 650 Brinell volute and impeller cast iron coated with abrasive resistant Wear-Con® Triple-Bead 90 ceramic wear-compound
水泵性能(加仑/分钟): 900 gpm (204m3/hr.) @ 50 ft. (15.2m) TDH 900 gpm (204m3/hr.) @ 50 ft. (15.2m) TDH 1,200 gpm (272m3/hr.) @ 60 ft. (18.3m) TDH 3,000 gpm (680m3/hr.) @ 75 ft. (22.9m) TDH
泵送球形固体通道: 6.0英寸(152毫米) 6.0英寸(152毫米) 3.0英寸(76毫米) 3.0英寸(76毫米)
Cut Width: 7 ft. 6 in. (2.3m) wide 7 ft. 6 in. (2.3m) wide 7 ft. 6 in. (2.3m) wide 7 ft. 6 in. (2.3m) wide
刀盘扭矩: 3,600 in-lbs (410 N-m) 3,600 in-lbs (410 N-m) 6,000 in-lbs (680 N-m) 6,000 in-lbs (680 N-m)
Propulsion System: Double sheave hydraulic-driven winch 10 in. (254mm)
行驶速度 0-30 fpm (feet per minute) adjustable 0-30 fpm (feet per minute) adjustable 0-30 fpm (feet per minute) adjustable 0-30 fpm (feet per minute) adjustable
Radio Sense™: Radio Remote Control s/ Shoulder Harness
Auto Sense™: Automatic dredging between traverse cable target stops. Will stop are starting point once cut is finished and wait for next command.
Bottom Sense™: Raises auger when the bottom is contacted and lowers the auger when the bottom is not present to maximize production rates. 可选 可选 可选 可选
Solids Sense™: Utilizes a density meter and proprietary programming to increase or decrease the dredging speed to meet a desire pre-set solids density. 可选 可选 可选 可选
Lateral Sense™: In combination with shore based I-Beams on both sides of the pond, the Lateral Movement system allows the dredge to laterally side to the next paralell cut without repositioning shore anchors. (ideal for permanent installations where continuous dredging is required.) 可选 可选 可选 可选
Liner Protection Wheels (to protect poly plastic and cement lined lagoons and waterways)
流量计 可选 可选 可选 可选
变频驱动(VFD)
NEMA 4 rated electrical enclosure
NEMA 4X rated electrical enclosure 可选 可选 可选 可选
创业及培训(包含机票、酒店、餐饮和每日费用)
埃利科特疏浚企业标志

二月22-25,2026

盐湖城,犹他

埃利科特疏浚企业标志

March 3-7, 2026

内华达州拉斯维加斯

使用代码:ELL5455C

请访问我们的网站
C22319号展位(中央大厅)