เครื่องขุดลอกแบบพกพาใช้ในการขุดทรายซิลิกา

โครงการฟื้นฟูทะเลสาบในเบย์พอยต์ รัฐมอนแทนา

Dresser Minerals, a division of Dresser Industries, Inc., has been using a Mud Cat from Mud Cat International’s Mud Cat Division to recover silica sand from an open pit mine filled with water at its Dubberly, Louisiana, plant.

According to Stephen Yeich, plant manager, Dresser has been using a dredge for การทำเหมืองแร่ purposes since 1974. Before that, a heavy duty scraper had been used, until at 75 feet, the water table was reached and the mine was filled with water.

“When we reached the water table we had to find a new way to mine the sand, and การขุดลอก was the logical choice because the process is much cheaper,” said Yeich. “We began looking at dredges, including the Mud Cat, but at the time I thought the Mud Cat was too small for our purposes.”

Instead, Yeich purchased a larger dredge, and used that until May 24, when it developed a “fatigue crack” in one of its hulls and sank.

“After the old dredge sank we began looking for a machine that would suit our purposes, and yet be economical. We wanted one with a cutter head because we felt it would increase our production and make it a better operation overall,” said Yeich.

“We looked at larger dredges but finally decided on a Mud Cat.”

Mud Cat is equipped with a patented auger assembly mounted at the end of a hydraulically-operated boom which is attached to the front of the machine. This auger, covered by a specially designed auger-shield, is lowered into the water during operation. As the auger turns, the silica sand coming into contact with the auger is trapped in the shield and forced to the center of the auger where a powerful suction pump sucks the sand through the intake tube and pushes it out through a discharge pipe. This pipe floats on the surface by means of attached floatation tubes.

The Mud Cat pumps 50 tons an hour with an average of 20% solids, although the solids level has been as high as 36%. The sand is pumped 1000 feet with an elevation of about 100 feet.

Yeich has added an extra attachment to the Mud Cat. It is an irrigation hose used to wash the sand off the high banks into the water so the Mud Cat’s™ cutter head can mine it.

“The Mud Cat is a lot smaller than our old dredge and to avoid being caught when the bank caves in, we added the irrigation hose. That way we can control the caving,” said Yeich.

Mud Cat’s Dredge Division designs and builds larger dredges when digging depth or output requirements exceed the capabilities of the portable Mud Cat.

Mud Cat Division of Mud Cat International

ต้องการข้อมูลเพิ่มเติมเกี่ยวกับเรื่องนี้ หรือต้องการพูดคุยกับตัวแทนของ Mud Cat เกี่ยวกับโครงการขุดลอกของคุณหรือไม่?

กระทู้ที่เกี่ยวข้อง

เรือขุดไฟฟ้าลำใหม่ของ PADCOM

รีวิวเรือ | เรือขุดไฟฟ้าแบบสั่งทำพิเศษสำหรับบริษัทเหมืองแร่โพแทสในแคนาดา

เรือขุดแบบมีคนควบคุมนี้ถูกสร้างขึ้นเพื่อตัดผลึกโพแทสในอุณหภูมิที่ต่ำถึง -45°C โดยเข้ามาแทนที่ปั๊มที่ติดตั้งบนเรือบรรทุกในเหมืองโพแทสแห่งเดียวของแมนิโทบา และยังสามารถบรรทุกบนรถบรรทุกคันเดียวได้

อ่างน้ำเกลือโพแทสที่บุด้วย HDPE ของ PADCOM ในรัฐแมนิโทบา ประเทศแคนาดา

บริษัท Ellicott Dredge Enterprises ส่งมอบและติดตั้งระบบขุดลอกแร่โพแทสไฟฟ้า Mud Cat® 30EC แบบสั่งทำพิเศษสำหรับ PADCOM

เครื่องแยกแร่โพแทสเซียมด้วยไฟฟ้าแบบสั่งทำพิเศษ รุ่น Mud Cat 30E ได้รับการพัฒนาโดยทีมวิศวกรรมของ EDE ร่วมกับลูกค้า เพื่อให้ได้อัตราการไหลและความหนาแน่นของโพแทสเซียมตามที่ต้องการ

เครื่องขุดลอกไฟฟ้าควบคุมระยะไกล Mud Cat MC 40E

เรือขุดลอกไฟฟ้า Mud Cat MC 40E เริ่มใช้งานในสาธารณรัฐประชาธิปไตยคองโก

เมื่อสัปดาห์ที่แล้ว ร็อบ คารูเฟล ช่างเทคนิคภาคสนามอาวุโส ได้ทำการทดสอบใช้งานเครื่องขุดลอกไฟฟ้าควบคุมระยะไกลรุ่น Mud Cat MC 40E ของบริษัท Ellicott Dredge Enterprises LLC ที่เหมืองแห่งหนึ่งในสาธารณรัฐประชาธิปไตยคองโก (DRC)

โลโก้บริษัท Ellicott Dredge Enterprises

กุมภาพันธ์ 22-25, 2026

Salt Lake City, ยูทาห์

พบกับเราได้ที่บูธหมายเลข 2937

โลโก้บริษัท Ellicott Dredge Enterprises

มีนาคม 3-7, 2026

ลาสเวกัส, เนวาดา

ใช้รหัส: ELL5455C

ติดตามเราได้ที่
บูธ C22319 (ห้องโถงกลาง)